NETIO Products

 ConnectionSwitchedMeteredSmartInputsNFCWebNETIOLocalWatchDogSchedulerMobile AppHTTPsOpen APIs
OutputsChannelsSwitchingInterfaceCloudscriptingfunctionfunction
PowerPDU 4C2xLAN4xC134ZCSRS-232-YesYesLua scriptsPingYesiOS + Yes15 protocols
Android
PowerPDU 4PSLAN4xC13-ZVS--YesYesConditionPingYesiOS + -10 protocols
& RulesAndroid
PowerPDU 4KSLAN4xC134ZCS1xDI-YesYesConditionPing + PowerYesiOS + -10 protocols
​& RulesAndroid
PowerPDU 8QSLAN8xC131+1ZVS1xDI-YesYesConditionPing + PowerYesiOS + -10 protocols
​& RulesAndroid
PowerDIN 4PZLAN2+22ZCS / -2xDIYesYesYesConditionPing + PowerYesiOS + -10 protocols
WiFi(S0)​& RulesAndroid
PowerBOX 3PxLAN3x-ZVS--YesYesConditionPingYesiOS + -10 protocols
​& RulesAndroid
PowerBOX 4KxLAN4x4ZCS--YesYesConditionPing + PowerYesiOS + -10 protocols
​& RulesAndroid
PowerCable RESTWiFi1x1ZCS-YesYesYesConditionPing + PowerYesiOS + -10 protocols
​& RulesAndroid
PowerCable 2KZLAN22ZCS2xDIYesYesYesConditionPing + PowerYesiOS + -10 protocols
WiFi(S0)​& RulesAndroid
PowerCable 2PZLAN2 ZVS YesYesYesConditionPing + PowerYesiOS + -10 protocols
WiFi​& RulesAndroid

 

PowerPDU 4KS

NETIO PowerPDU 4KS is a smart PDU (Power Distribution Unit) with four metered power outlets (4x IEC-320 C13).

Integration into third-party systems using various protocols (JSON, Modbus/TCP, SNMP, MQTT-flex, Telnet, ...) is easy thanks to the open API

With the ...

More about PowerPDU 4KS

PowerPDU 8QS

NETIO PowerPDU 8QS is a PDU (Power Distribution Unit) with eight power outputs (8x IEC-320 C13) controlled and metered over a LAN. It fits into a 19” cabinet (1U). Each output can be switched on/off individually. PowerPDU 8QS supports two channels for electrical measurements: the PDU as a whole (all outputs combined),...

More about NETIO PowerPDU 8QS

PowerBOX 4Kx

NETIO PowerBOX 4Kx is a LAN-enabled smart power strip with 4 outputs. Integration with third-party systems using various protocols (JSON, Modbus/TCP, SNMP, MQTT-flex, Telnet, ...) is easy thanks to the Open API. Electrical parameters (A, W, kWh, TPF) are measured with...

More about PowerBOX 4Kx

PowerDIN 4PZ

PowerDIN 4PZ is a dual 230V/16A electricity meter with LAN/WiFi and I/O, designed to fit on a DIN rail.

Enables control over the Web, NETIO Cloud, Open API.

Each of the 4 outputs can be switched on or off independently using the Web interface, or with Open API and NETIO...

More about PowerDIN 4PZ

PowerPDU 4PS

NETIO PowerPDU 4PS is a smart PDU (Power Distribution Unit) with four power outlets (4x IEC-320 C13).

Integration into third-party systems using various protocols (JSON, Modbus/TCP, SNMP, MQTT-flex, Telnet, ...) is easy thanks to the open API

With the NETIO Cloud...

More about PowerPDU 4PS

PowerBOX 3Px

NETIO PowerBOX 3Px is a professional electrical socket device with 3 outputs and LAN connectivity. Each output socket can be separately switched on or off over the web interface. Integration into third-party systems using various protocols (JSON, Modbus/TCP, SNMP, MQTT-flex, Telnet, ...) is easy thanks...

More about PowerBOX 3Px

PowerPDU 4C

NETIO PowerPDU 4C is a small 110/230V PDU (Power Distribution Unit). Each of the four IEC-320 C13 outlets can be independently controlled (On / Off / Reset / Toggle).

Electrical parameters (A, W, kWh, TPF, V, Hz) are measured with high accuracy at each outlet. The device features two LAN ports (...

More about NETIO PowerPDU 4C

PowerCable REST 101x

NETIO PowerCable REST 101x is a smart WiFi power socket for integration with third-party systems using its open API (10 protocols).

 

Use PowerCable REST to measure electricity consumption and switch its output on/off using one of the 10 Open API protocols, the web interface, NETIO Cloud,...

More about PowerCable REST 101x

PowerCable 2KZ

NETIO PowerCable 2KZ is a smart LAN/WiFi power socket for integration with third-party systems using its open API (10 protocols).

 

Use PowerCable REST to measure electricity consumption and switch its 2 output on/off using one of the 10 Open API protocols, S0 input, the web interface, NETIO Cloud,...

Mere om PowerCable 2KZ

PowerCable 2PZ

NETIO PowerCable 2PZ er et smart LAN/WiFi-strømstik til integration med tredjepartssystemer ved hjælp af dets åbne API (10 protokoller).

 

Use PowerCable REST to switch its 2 output on/off using one of the 10 Open API protocols, the web interface, NETIO Cloud,...

Mere om PowerCable 2PZ

 

Obsolete products

PowerCable IQRF 901x

NETIO PowerCable IQRF 901x is a smart power extension cable that communicates over the IQRF LPWAN network (868 MHz).

 

The 230V/16A electrical socket features accurate electricity metering (A, V, W, TPF, kWh, Hz) and can be switched on and off with full IQRF Interoperable ...

More about PowerCable IQRF 901x

PowerCable MQTT 101x

NETIO PowerCable MQTT 101x is a professional WiFi power socket featuring open API for integration with cloud IoT services.

The output socket can be controlled (On/Off) and electricity consumption measured (A, Wh, TPF, V, ..) from any IoT service. The WiFi socket supports the MQTT-...

More about PowerCable MQTT 101x

PowerCable Modbus 101x

NETIO PowerCable Modbus 101x is a smart WiFi power socket by NETIO products.

 

The output smart power outlet can be turned on/off over a web interface. The web interface also shows measured electrical values(V, A, kWh, W, Hz, TruePF). 

More about PowerCable Modbus 101x

NETIO 4All

NETIO 4All is programmable power socket communicating via MQTT, SNMP, Modbus and more

NETIO 4All is the most feature-rich module with 4x 230V/8A remotely-controlled power sockets connected to LAN and WiFi. 
 

Each socket can be individually switched on/off and its electricity consumption metered.
 

The device can be used as a WiFi AP (access point), and an external antenna can...

More about NETIO 4All

NETIO 4

NETIO 4 is power socket programmable in Lua scripting language

NETIO 4  is a module with 4x 230V/8A remotely-controlled smart power sockets connected to LAN and WiFi.
 

Each socket can be remotely switched on/off.
 

NETIO 4 can be controlled remotely using many M2M API protocols (SNMP v3, SIP, XML/HTTPs, MQTT, CGI, ..).

More about NETIO 4

NETIO Cloud

NETIO Cloud is an ideal solution for remote control and restarting of multiple NETIO PDUs, power strips and cables from anywhere. The number of connected devices is unlimited. NETIO Cloud is well-secured and reliable service. Accessible via any web browser at https://cloud.netio-products.com/.

More about NETIO Cloud

NETIO Mobile

The NETIO Mobile app allows you to control individual 110/230V sockets of one or more NETIO 4x (NETIO 4, NETIO 4All, NETIO 4C) smart socket products with a mobile phone or tablet.

Android iOS

Accessories

NETIO MK3 PowerBOX 19 vertical

Metal brackets to fasten 1 unit of NETIO PowerBOX 3Px / 4Kx to a vertical bar in a rack frame. The package includes 4x M6 screws to fasten the device.

MK3 PowerBOX 19 front view

NETIO MK2 PowerBOX 19 horizontal

Metal brackets (2 pieces) for 1 unit of NETIO PowerBOX 3Px / 4Kx into a 1.5U space in a 19” rack frame. The package includes M6 screws to fasten the device in the 1.5U horizontal position.

MK2 PowerBOX 19 back view

NETIO MK1 PowerBOX

Metal bracket for 1 piece NETIO PowerBOX 3Px on the wall contains two pieces of metal. Both parts of the holder slide into the aluminum profile from behind.

NETIO RM1 4C

Metal brackets to install one NETIO PowerPDU 4PS, PowerPDU 4KS or NETIO PowerPDU 4C device into a 1U space in a 19” rack frame. The package includes M6 screws to fasten the device in the 1U position.

Metal brackets to install one NETIO 4C device into a 1U space in a 19” rack frame.

NETIO RM2 2x4C

Metal brackets to install two PowerPDU devices (4C / 4KS 4PS) into a 1U space in a 19” rack frame. The package includes M6 screws to fasten the devices in the 1U position.

Metal brackets to install two NETIO 4C devices into a 1U space in a 19” rack frame

NETIO RM3 4C vertical

Metal brackets to fasten one NETIO PowerPDU 4C/4KS/4PS/8QS device to a vertical bar in a rack frame. In a 76cm or wider cabinet, the PowerPDU 4C/4KS/4PS/8QS can be fastened to the outer side of the vertical bars to occupy zero U space.

Metal brackets to fasten one NETIO 4C device to a vertical bar in a rack frame

NETIO RM4 4C universal

Universal metal brackets to fasten one PowerPDU 4PS, PowerPDU 4KSPowerPDU 4C or PowerPDU 8QS device e.g. to horizontal bars in a rack frame.

Universal metal brackets to fasten one NETIO 4C device e.g. to horizontal bars in a rack frame

NETIO RM5 N4

A metal bracket to fasten one NETIO 4 or NETIO 4All device to a vertical bar in a rack frame. In a 80cm or wider cabinet, the NETIO 4 / 4All can be fastened to the outer side of the vertical bars to occupy zero U space.

A metal bracket to fasten one NETIO 4 or NETIO 4All device to a vertical bar in a rack frame

preload spinner

preload spinner
{{product.Title}}

Varenr: